Rubber Stoppers
Chemists, students and teachers alike frequently use rubber stoppers in their labs and experiments to plug flasks and test tubes. The purpose of the rubber stoppers is to prevent liquids, and sometimes gases, from escaping their containers, as well as prevent contaminants from entering the containers. Normally, liquid chemicals are contained within bottles with screw-on caps, but a minor challenge experimenters face is that they mix chemicals in glass test tubes and flasks that do not have threads upon which to screw a cap. That is where the rubber stopper comes into the picture. A rubber stopper is the ideal tool for plugging these containers.
How to use Rubber Stoppers
1. Choose the rubber stopper of the correct size for your container. A rubber stopper is designed such that the top end is wider than the bottom end. A rubber stopper will be the correct size for a flask or test tube if the bottom end is narrower than the opening of the flask or test tube, but the top end is wider.
2. Choose the correct number of holes in the stopper. Most rubber stoppers are solid pieces of rubber with no holes in them. These are fine for working with non-volatile chemicals that do not build up pressure in a sealed container. Certain chemical mixtures have high volatility and can create gas pressure that can break a glass flask or test tube. For such mixtures, stoppers with holes should be used to allow the gas to escape before too much pressure builds. You may also use stoppers with holes if they are using the flask or test tube as part of a larger apparatus, such as a distillation apparatus, and will be connecting various sealed containers together with tubing that runs from stopper to stopper. Note that when inserting tubing into the hole of a rubber stopper, a lubricant should always be used to reduce the risk of breaking the tubing or container when forcing it into the hole.
3. Insert the stopper that you have chosen narrow-side-first into the opening of the test tube or vial that you are sealing. Push it far enough in so that you meet significant resistance to further pushing, then stop. Do not use excessive force to push the stopper too far into the container because that may result in the glass breaking.
Rubber Stopper Varieties
Stoppers are available in solid, 1 hole and 2 hole. Sizes range from 000 to 12.
Rubber Stopper Uses
Plug for test tubes or flasks
Bumper
Mechanical Stop
Grippers
Clamps
Pipe Stoppers
Tube Plugs
Door Stoppers
Vibration Mount
Paint Masks